 |
|
|
|
Gran turismo |
Torque Capability |
H Type |
Sequential |
|
T756H |
T756S |
|
T906H |
T906S |
|
T750
- 6 speed plus 1 reverse
- Triple cone syncronisation for 1st and 2nd gear
- Double cone syncronisation for 3rd, 4th, 5th and 6th gear.
- Syncronised reverse gear
- Force-fed lubrication (with option for an external cooler)
- The differential axle can be fitted above or below the driving axle
- Torque sensing self-locking differential
- Hydraulic clutch drive is coaxial with the drive shaft
- In sequential specification reverse engagement is protected
- Gearbox shifting by Bowden cable
| Transaxle Gearbox - H pattern or Sequential shifting or Paddle |
|
T756H / T756S / T756P |
| Maximum input torque |
750 Nm |
| Maximum output torque |
5,000 Nm |
| Input r.p.m. |
7,000 |
| |
| Gear ratios: |
| 1st gear |
2.875 |
| 2st gear |
1.773 |
| 3st gear |
1.267 |
| 4st gear |
1.000 |
| 5st gear |
0.833 |
| 6st gear |
0.711 / 0.733 |
| |
| Reverse G. |
3.000 |
| Rear-axle ratio |
2.916 - 3.364 - 3.545 - 3.700 - 4.111* |
| Spline shaft clutch 1" 1/8 inch 10 C (others on request) |
| *others on request |
|
|
T900
- 6 speed plus 1 reverse
- Triple cone syncronisation for 1st and 2nd gear
- Double cone syncronisation for 3rd, 4th, 5th and 6th gear.
- Syncronised reverse gear
- Force-fed lubrication (with option for an external cooler)
- The differential axle can be fitted above or below the driving axle
- Torque sensing self-locking differential
- Hydraulic clutch drive is coaxial with the drive shaft
- In sequential specification reverse engagement is protected
- Gearbox shifting by Bowden cable
| Transaxle Gearbox - H pattern or Sequential shifting or Paddle |
|
T906H / T906S / T906P |
| Maximum input torque |
900 Nm |
| Maximum output torque |
6,000 Nm |
| Input r.p.m. |
7,000 |
| |
| Gear ratios: |
| 1st gear |
2.875 |
| 2st gear |
1.773 |
| 3st gear |
1.267 |
| 4st gear |
1.000 |
| 5st gear |
0.833 |
| 6st gear |
0.711 / 0.733 |
| |
| Reverse G. |
3.000 |
| Rear-axle ratio |
2.916 - 3.364 - 3.545 - 3.700 - 4.111* |
| Spline shaft clutch 1" 1/8 inch 10 C (others on request) |
| *others on request |
|
|
|
|
|
|
|
|
|